Lippert-components CA-UR Bedienungsanleitung PDF herunterladen

NOTE: Rear anchors are installed in the

end of the bumper. There is no precise

mounting location since a variety of

bumpers may be installed. The general

guidelines are as follows:

Mounting location should be as flat

& vertical as possible.

Be sure no moldings or bumper

caps interfere with the removable

coupler.

Check back side of selected

mounting location to ensure

adequate access for tightening nut.

Chose a location as far back as

possible from the front edge of

bumper while giving consideration

to the other criteria listed above and

center punch and drill a 1/8" pilot

hole then enlarge to 1/2". Install

Anchor Bolt with 2" fender washer,

lock washer & nut.

Flat edges of Anchor Bolt must be

Horizontal.

Happijac Company, 505 N. Kays Dr., Kaysville, UT 84037 * (800) 231-7440 * [email protected]

inscaur110403

Inhaltsverzeichnis

Seite 1

NOTE: Rear anchors are installed in theend of the bumper. There is no precisemounting location since a variety ofbumpers may be installed. The general

Kommentare zu diesen Handbüchern

Keine Kommentare

Lippert-components CA-UR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Lippert-components CA-UR herunter. Lippert Components CA-UR User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lippert-components CA-UR