Lippert-components CBB07 Bumper Brace Installaion Bedienungsanleitung PDF herunterladen

The frame brace runs between the bottom edge of the bumper and the bed

cross member near the rear tire. The connection to the bumper is made by

sandwiching the bumper between the large angular plate and the end of the

frame brace rod. The connection at the upper end of the rod is made by

connecting to an existing hole in the bed cross member.

(Drivers side installation shown)

Step 1. Assemble a right and left assembly

by placing a

/8” x 1 ½” bolt through the

frame brace rod at the end with the ¼” thick

reinforcing block, then through the angular

support plate. Install flat washer, split lock

washer and nut, leaving a gap for the bumper .

See fig. A

The passenger side setup is the

same except the large angular

place protrudes from the opposite

side of the frame brace.

Step2. Slip the bumper

between the small plate on the

frame brace rod and the larger

angular large plate, with the

angular plate turned out toward

the end of the bumper.

Dashed line in Fig B. shows the

plate location above the bottom

edge of the bumper. See fig. B

The other end of the frame brace

is attached to the bed cross

member beneath the bed of the

truck. Continue to step 3 for

installation detail for this end of

the brace.

INSTRUCTIONS CONTINUED

ON REVERSE

A Division of Lippert Components

CBB07

Chev / GMC

Bumper Brace

Installation Instructions

Fig. A

(Driver Side)

Bumper edge

between here.

Set frame

brace 1”

away from

outer bed

panel.

Fig. B

1 ½” Bolt &

Flat Washer

Hex Nut &

Lock Washer

Plate

1”

BED CROSS

MEMBER

1030

1 2

Inhaltsverzeichnis

Seite 1 - Installation Instructions

The frame brace runs between the bottom edge of the bumper and the bed cross member near the rear tire. The connection to the bumper is made by sand

Seite 2 - Threaded

BedCrossMemberExistingHole Fig. CStep 3a. (2007-2010 only)Secure the upper end of the frame brace rod to the bed cross member using the existing hole

Kommentare zu diesen Handbüchern

Keine Kommentare

Lippert-components CBB07 Bumper Brace Installaion Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Lippert-components CBB07 Bumper Brace Installaion herunter. Lippert Components CBB07 Bumper Brace Installaion User Manual [de] [it] [fr] [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Lippert-components CBB07 Bumper Brace Installaion